CASTECH's high power fiber to free space isolators have center wavelength of 980/1030/1064nm, could maintain frequency stability in fiber lasers, fiber amplifier, optical sensor. High power fiber to free space isolators’ handling power up to 200W. CASTECH's fiber to free space isolators are with expanded beam output and Non-Expanded beam isolators are also available.
CASTECH's high power fiber to free space isolators have center wavelength of 980/1030/1064nm, could maintain frequency stability in fiber lasers, fiber amplifier, optical sensor. High power fiber to free space isolators’ handling power up to 200W. CASTECH's fiber to free space isolators are with expanded beam output and Non-Expanded beam isolators are also available. The parameters can be customized according to customer requirements.
◆ Center wavelength is 980/1030/1064nm ◆ Maintain frequency stability in fiber
◆ Peak Isolation ≥35dB lasers, fiber amplifier, optical sensor
◆ Handling power up to 200W ◆ Used in fiber optic measuring equipment
◆Fiber input and expanded beam output or not and optical coherence detection
◆The type of fiber is customized ◆ Widely used in industrial processing areas
With Laser Pointer
Operating Wavelength Range
Isolation inbandat 23℃
Return Loss (Input/Output)
LMAFiber/PM Fiber or Specify
Output Beam diameter(1/e2)
6,7,8mm or Specify
0.5mm or Specify
20,30,50,100,200W or Specify
10,20,30,50W or Specify
Peak Pulse Power
50KW or Specify
20KW or Specify
Product specifications are subject to change without notice;
Customized (Wavelength, Dimension, Power Handling , etc) are available;
Note:All products are RoHS compliant.
( d )
(With Laser Pointer)
(6mm Armoured Cable)
(8mm Armoured Cable)
(900μm Loose Tube)
The main component of the optical isolator is the Faraday rotator. The magnetic field B, applied to the Faraday rotator causes a rotation in the polarization of the light due to the Faraday effect. The angle of rotation θ is given by θ=vBL, where v is the Verdet constant of the magneto-optic material, and L is the length of the magneto-optic material. Specifically for an optical isolator, the values are chosen to give a rotation of 45°.
Faraday rotator is an important optical element in an isolator. The characteristics of a Faraday rotator include a high Verdet constant, low absorption coefficient, low non-linear refractive index and high damage threshold. The two most commonly used materials for the 700–1100 nm range are terbium doped borosilicate glass and terbium gallium garnet crystal (TGG). For infrared wavelength range, typically for the 1300-4000nm, yttrium iron garnet crystals are used (YIG).
Faraday rotator provides non-reciprocal rotation while maintaining linear polarization. That is, the polarization rotation due to the Faraday rotator is always in the same relative direction. So in the forward direction, the rotation is positive 45°. In the reverse direction, the rotation is ?45°. This is due to the change in the relative magnetic field direction, positive one way, negative the other. This then adds to a total of 90° when the light travels in the forward direction and then the negative direction. This allows the higher isolation to be achieved.
Optical isolator according to its physical principles can be divided into polarization dependent isolator and polarization independent isolator.The polarization dependent isolator, or Faraday isolator, is made of three parts, an input polarizer (polarized vertically), a Faraday rotator, and an output polarizer, called an analyser (polarized at 45°).
Polarization dependent isolators are typically used in free space optical systems. This is because the polarization of the source is typically maintained by the system. In optical fibre systems, the polarization direction is typically dispersed in non polarization maintaining systems. Hence the angle of polarization will lead to a loss.
The polarization independent isolator is made of three parts, an input birefringent beam displacer, a Faraday rotator, a half-waveplate, and an output birefringent beam displacer.
Polarization independent isolators are typically used in fiber laser systems to maintain frequency stability, such as industrial processing areas etc.
Dear visitors! Please submit your feedback information!